 |
|
 |
This is where events should go
This should feature new products or video
|
- HOME
- PRODUCTS
- Combustion Efficiency Analyzers (Flue Gas Analyzers)
- 708 Combustion Efficiency Analyzer
- 709 Combustion Efficiency Analyzer and Differential Manometer
- 709R Combustion Efficiency Analyzer w/ Differential Manometer
- 712 Deluxe combustion efficiency analyzer with optional PC interface
- 714 Combustionefficiency analyzer with NOX and optional PC capoirlity
- 715 High CO (above 10,000ppm carbon monoxide) combustion analyzer with built-in differential themometer, differential manometer, and NO measurement & NOX calculation
- 715K3 Gas Compression Engine Service Kit High CO (above 10,000ppm carbon monoxide) combustion analyzer with built-in differential themometer, differential manometer, and NO measurement & NOX calculation
- Condition Based Monitoring
- Clamp-on Meters (Current)
- Multimeters (DMMs)
- Manometers (Pressure)
- 605: Single input vacuum gauge
- 608: Single input manometer with +/-60inH2O range
- 610: Single Input Manometer with ±80 inH2O range and 0.01 in H2O resolution
- 615: Single Input Manometer with ±80 inH2O range and 0.01 in H2O resolution
- 620: Dual Differential Input Manometer with ±80 inH2O range and 0.01 in H2O resolution
- 621: Dual Differential Input Manometer with ±120 inH2O range and 0.001 in H2O resolution
- 621C3: Differential input high resolution manometer with A612 protective boot, two A603 1/8" barbed NPT fittings, two A605 1/8" barbed T fittings, two A776 static tips, and A908 carrying case with shoulder strap
- 625: Dual Differential Input Manometer with ±80 inH2O range and 0.01 in H2O resolution
- 635: Dual Differential Input Manometer with ±5 psi range and 0.001 psi resolution
- 645: Dual Differential Input Manometer with ± 29 psi range and 0.1 psi resolution
- 645NPT: Dual Differential Input Manometer with ± 29 psi range and 0.1 psi resolution
- 665: Dual Input Differential Manometer with ±100 psi range and 0.01 psi resolution
- 665L: Dual Input Differential Manometer with ±100 psi range and 0.01 psi resolution
- Gas Detection
- Combustion Analyzers
- 708: Combustion Efficiency Analyzer
- 709: Combustion Efficiency Analyzer and Differential Manometer
- 709R: Combustion Efficiency Analyzer w/ Differential Manometer
- 712: Deluxe combustion efficiency analyzer with optional PC interface
- 714: Combustionefficiency analyzer with NOX and optional PC capoirlity
- 715: High CO (above 10,000ppm carbon monoxide) combustion analyzer with built-in differential themometer, differential manometer, and NO measurement & NOX calculation
- 715K3: Gas Compression Engine Service Kit High CO (above 10,000ppm carbon monoxide) combustion analyzer with built-in differential themometer, differential manometer, and NO measurement & NOX calculation
- Carbon Monoxide Analyzers
- Combustible Gas Detectors
- Refrigeration Leak Detectors
- Combustion Analyzers
- Indoor Air Quality (IAQ)
- Temperature
- Contact Temperature Testers
- 340: -40 to +1,200 °F range, single button operation, uses K-type thermocouple with sub-mini connector
- 341K: -58 to 2,462 °F (-50 to 2,462 °C) range
- 343: -58 to 2,462 °F (-50 to 2,462 °C) range
- 351: -40 to 220°F range (351X = -40 to 104°C) +/- 1 °F system accuracy (tester and probe) over 32 to 158°F range, single button, thermistor probe with bipolar connector
- 353: -40 to 220°F range +/- 1°F accuracy (thermistor), -328°F to 750°F range 0.3% basic accuracy (T-type thermocouple), single button operation, uses thermistor probe or T-type thermocouple with Lumberg connector
- 354: -40 to 220°F range +/- 1.8°F accuracy (thermistor), -328°F to 750°F range 0.3% basic accuracy (T-type thermocouple), Min/Max Record, °C/°F Selectable, uses thermistor probe or T-type thermocouple with Lumberg connector
- 365: -328°F to 1112°F (-200°C to 600°C) range0.1% basic tester accuracy, waterproof IP67, uses K-type thermocouple with sub-mini connector
- 367D: -58°F to 302°F (-50°C to 150°C) range (thermistor), -328°F to 1112°F (-200°C to 600°C) range (K-type thermocouple), -328°F to 752°F (-200°C to 400°C) range (T-type thermocouple), Auto Field Calibrated to a system accuracy (Tester plus Probe) of +/- 1 °F in less than 10 seconds in ice water; uses Thermistor, K-type, or T-type probes with Lumberg connectors
- Non-contact (IR) Thermometers
- 368: Infrared Thermometers (IR)
- 370: Infrared Thermometers (IR)
- 371: Infrared Thermometers (IR)
- 375: Infrared Thermometers (IR)
- 376: Infrared Thermometers (IR)
- 377: Infrared Thermometers (IR)
- 380: Infrared Thermometers
- 381: Infrared Thermometers
- 381F: Infrared Thermometers
- 383: Infrared Thermometers
- 384: Infrared Thermometers
- Pocket Digital Thermometers
- Food Processing and Preparation
- Temperature Probes
- Contact Temperature Testers
- Temperature Probes
- Oscilloscopes (Handheld)
- Specialty Testers
- Food Safety, Processing & Preparation
- Contact Temperature Testers
- 340: -40 to +1,200 °F range, single button operation, uses K-type thermocouple with sub-mini connector
- 341K: -58 to 2,462 °F (-50 to 2,462 °C) range
- 343: -58 to 2,462 °F (-50 to 2,462 °C) range
- 351: -40 to 220°F range (351X = -40 to 104°C) +/- 1 °F system accuracy (tester and probe) over 32 to 158°F range, single button, thermistor probe with bipolar connector
- 353: -40 to 220°F range +/- 1°F accuracy (thermistor), -328°F to 750°F range 0.3% basic accuracy (T-type thermocouple), single button operation, uses thermistor probe or T-type thermocouple with Lumberg connector
- 354: -40 to 220°F range +/- 1.8°F accuracy (thermistor), -328°F to 750°F range 0.3% basic accuracy (T-type thermocouple), Min/Max Record, °C/°F Selectable, uses thermistor probe or T-type thermocouple with Lumberg connector
- 365: -328°F to 1112°F (-200°C to 600°C) range0.1% basic tester accuracy, waterproof IP67, uses K-type thermocouple with sub-mini connector
- 367D: -58°F to 302°F (-50°C to 150°C) range (thermistor), -328°F to 1112°F (-200°C to 600°C) range (K-type thermocouple), -328°F to 752°F (-200°C to 400°C) range (T-type thermocouple), Auto Field Calibrated to a system accuracy (Tester plus Probe) of +/- 1 °F in less than 10 seconds in ice water; uses Thermistor, K-type, or T-type probes with Lumberg connectors
- Contact Temperature Testers
- Test Leads & Accesories
- Accesories
- Combustion Efficiency Analyzers (Flue Gas Analyzers)
- SUPPORT
- FOR CONTRACTORS
- ABOUT TPI
- CONTACT US
- PRODUCT REGISTRATION
- SEARCH